Fernco Metal Products
  INNOVATIVE EARTH-FRIENDLY BUILDING PRODUCTS
HOME PRODUCTS ORDERS CONTACT US
AH Series Block Press -- Page 11 Goto Page 1 2 3 4 5 6 7 8 9 10 11
Day's End Clean Up
At the end of a day's production, wash down the block press with a hose or at least several buckets of water to remove all soil from the machine. This will prevent soil build-up and ensure smooth operation when the machine is next used.

Helpful Tips
Repeated exposure to water during use and clean up may cause rust to develop on the lid locking pins which in turn may make it difficult to lock the lid. If this occurs, you can remove the rust with a fine grit (600) emery cloth. Cut a one-inch wide strip of emery cloth and clean the tips of the locking pins as shown in the photo below.

photo60.jpg (31356 bytes)
Cleaning the lid locking pins with emery cloth

 
AH Series Block Press -- Page 11 Goto Page 1 2 3 4 5 6 7 8 9 10 11